百度了以下相关资料,很是让人心寒,中国人都干嘛去了?都是解决wifi密码的文章,所以自行google了一下英文资料,整理下放到这里
安装openssl 必需
# sudo apt-get install openssl
# sudo apt-get install libssl-dev build-essential zlibc zlib-bin libidn11-dev libidn11
下载wpa_supplicant
这是主页,最新版本能在这里找到 :http://hostap.epitest.fi/wpa_supplicant/
自行新建并cd目录(以下是目前的最新版,随着时间的推移就不一定了)
# wget http://hostap.epitest.fi/releases/wpa_supplicant-2.0.tar.gz
# tar -xzvf wpa_supplicant-2.0.tar.gz
# cd wpa_supplicant-2.0
# cd wpa_supplicant
# vi .config
把以下内容粘贴保存
#
#.config
#
# Uncomment following two lines and fix the paths if you have installed openssl
# in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
CFLAGS += -I../madwif
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
#CONFIG_DRIVER_WIRED=y
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# LEAP
CONFIG_EAP_LEAP=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
粘贴到此结束
安装
# make && make install
通过以下命令连接
# wpa_passphrase <yourAPssid> <yourpassphrase>
conf文件:
For WPA-PSK
ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 eapol_version=1 # ap_scan=2 was the one for me you may try 0 or 1 indstead of 2 ap_scan=2 fast_reauth=1 network={ ssid="my_network" proto=WPA key_mgmt=WPA-PSK pairwise=TKIP group=TKIP psk="secret_password" }
For WPA2-Personal
ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 ap_scan=1 network={ ssid="my_network" proto=RSN key_mgmt=WPA-PSK pairwise=CCMP TKIP group=CCMP TKIP psk="secret_password" }
您好,我有个wpa_supplicant的问题想请教你,能不能留个邮箱交流一下?
看到有人说等于没写,忍不住了,我就是看着作者的文章装好的wpa_supplicant,确实如作者所说资料很少
再次感谢一下作者的热心分享
感谢你的支持,我发的文章给大家带来了便利,我很开心
e
个人感觉,你这篇文章等于没写。还说别人让你心寒, 你牛逼
就不敢留个邮箱交流下?我寒的是baidu下搜索及资料的非常不全面,非常倾向于生活及广告等,所说wifi问题,是指中国人都在想着破解wifi密码,而对于问题的研究少些,等于没写?命令都贴上了,而且我也测试通过的,Ubuntu cubieboard arm下linux。